CM01U161T | COMMON MODE CHOKE COILS | 太阳诱电株式会社 for AP

COMMON MODE CHOKE COILS [SMD Common Mode Choke Coils for High Speed Differential Signal Lines]

产品规格

Status	Discontinued
No. of Lines	2
Common Mode Impedance	160 Ω typ at 100MHz
Common Mode Impedance (min)	120 Ω at 100MHz
Case Size (EIA/JIS)	0504/1210
Cutoff Frequency (typ)	3.0 GHｚ
DC Resistance (max)	0.6 Ω
Rated Current (max)	0.26 A
Rated Voltage (max)	20 V
Operating Temp. Range	-40 to +125 ℃ (Including-self-generated heat)
Insulation Resistance (min)	100 MΩ
Dimension A	1.2 ±0.2 mm
Dimension B	1.0 ±0.2 mm
Dimension C	Max 0.9 mm
RoHS Compliance (10 subst.)	Yes
Soldering	Reflow
Standard Quantity	Taping Embossed 3000pcs

Quantity

旧型号 :

Distributor	Quantity	Buy

外观

特征

CM01 Series is Wire-wound Structured Type Commom Mode Choke Coil which provides
highly effective noise suppression characteristics without distorting the wave pattern of
High-speed Differential Signal interface.

Developed 1210 case-size by utilizing our wire-wound technologies. This small and
wire-wound structured product has little transmission loss and keeps high common
impedance up to GHz range.

主要用途

Radiated noise suppression in the High-speed Diffrential Signal interfaces
[HDMI, Serial-ATA, IEEE1394, LVDS, and USB2.0] of LCD-TV, Blu-ray players, and PCs

Countermeasure for degradation of receiver sensitivity caused by high frequency noise
from high-speed differential signal of Cellular phones, Data Cards and Smartphones

Common mode noise suppression raised from the power line and audio signal in a small
device