INDUCTORS  [Wire-wound Ferrite Power Inductors LLXBH10050 for Medical Devices classified as GHTF Classes A or B (Japan Classes I or II)]

Specifications

Status Mass Production (Preferred)
Inductance 4.9 uH ± 30 %
Case Size (mm) 10.0x9.8
Rated Current (max) 6 A
Saturation Current (max) 6.6 A (⊿L=30%)
Temperature Rise Current (max) 6 A (⊿T=40℃)
DC Resistance (max) 19.5 mΩ
DC Resistance (typ) 15 mΩ
Self Resonant Frequency (min) 23 MHz
Operating Temp. Range -25 to +105 ℃
(Including-self-generated heat)
Temperature characteristic
(Inductance change)
± 20 %
Dimension L 10.0 ±0.3 mm
Dimension W 9.8 ±0.5 mm
Dimension H Max 5.0 mm
Dimension a Typ 4.0 mm
Dimension b Typ 1.75 mm
Measuring Frequency 100 kHz
RoHS Compliance (10 subst.) Yes
REACH Compliance (240 subst.) Yes
IEC62474 (Ver. D28.00) Compliance Yes(*)
Soldering Reflow
Standard Quantity Taping Embossed 500pcs

Appearance

To Higher Specification

Smaller
Lo-Rdc Lower
Hi-Curr.

Features

SMD inductor

It corresponds to High current

Simple and original magnetic shield structure

Main Applications

For Medical Devices classified as GHTF Classes A to B (Japan Classes Ⅰ to Ⅱ)

Power supply circuits / DC-DC converters in a variety of applications

Document

 

Simulation data

Links

 

RoHS and REACH Certificate of Compliance

Characteristic value graphs

(*) Chlorine resulting from epoxy resin exceeds 1000ppm. ; Since chlorine is not from source of the CFR / PVC or PVC copolymers, we apply "Yes" to this product by the definition of low-halogen, JS-709A.
The saturation current value is the DC current value having inductance decrease down to 30%. (at 20℃)
The temperature rise current value is the DC current value having temperature increase up to 40℃. (at 20℃)
Please contact our sales staff when ordering or inquiring the details about products on our website.
{{title}}