(Previous Part Number HV-25V331MH10XQ-R2)
AL ELECTROLYTIC CAPACITORS
[Conductive Polymer Hybrid Aluminum Electrolytic Capacitors[HV1] for Automotive Powertrain and Safety]
| Status | Mass Production (Preferred) |
|---|---|
| Operating Temp. Range | -55 to +105 ℃ |
| Rated Voltage | 25 V |
| Rated Capacitance | 330 uF |
| Tolerance at rated capacitance | ± 20 % |
| Leakage current (max) | 83 uA at 2 min |
| Tangent of loss angle (tanδ) (max) | 0.14 |
| ESR (max) | 20 mΩ at 100k Hz / 20 ℃ |
| Rated Ripple (max) | 2500 mArms at 100k Hz / 105 ℃ |
| Impedance ratio___[-25℃/+20℃] | 1.5 |
| Impedance ratio___[-55℃/+20℃] | 2 |
| Endurance (Applied ripple current) ___[Test time] |
5000 hr at 105 ℃ |
| Endurance___[Leakage current] | The initial specified value or less |
| Endurance___[Capacitance change] | Within ±30% of initial value |
| Endurance___[tanδchange] | 200% or less of initial specified value |
| Endurance___[ESR change] | 200% or less of the initial specified value |
| Shelf life___Test time | 1000 hours at 105℃ ; Other items are same as the endurance. However, the performance shall be after voltage application treatment (JIS C5101-4). |
| Dimension φD | φ10 ±0.5 mm |
| Dimension L | 10 ±0.5 mm |
| Dimension A | 10.4 ±0.2 mm |
| Dimension B | 10.4 ±0.2 mm |
| Dimension (C) | 3.3 mm |
| Dimension (P) | 4.7 mm |
| Dimension W | 0.7 to 1.1 mm |
| Dimension M | 0.4 ±0.3 mm |
| RoHS Compliance (10 subst.) | Yes |
| REACH Compliance (247 subst.) | Yes |
| Soldering | Reflow |
| Standard Quantity | Embossed taping 500 pcs |
