(Previous Part Number RVX-25V330MG10U-R2)
AL ELECTROLYTIC CAPACITORS
[Vertical Chip Type Aluminum Electrolytic Capacitors[VVX] for General Electronic Equipment]
| Status | Non-preferred |
|---|---|
| Operating Temp. Range | -40 to +135 ℃ |
| Rated Voltage | 25 V |
| Rated Capacitance | 33 uF |
| Tolerance at rated capacitance | ± 20 % |
| Leakage current (max) | 8.2 uA at 2 min |
| Tangent of loss angle (tanδ) (max) | 0.24 |
| ESR (max) | 0.7 Ω at 100kHz / 20 ℃ |
| Rated Ripple (max) | 115 mArms at 100kHz / 135 ℃ |
| Impedance ratio___[-25℃/+20℃] | 2 |
| Impedance ratio___[-40℃/+20℃] | 3 |
| Endurance (Applied ripple current) ___[Test time] |
1000 hours at 135 ℃ |
| Endurance___[Leakage current] | The initial specified value or less |
| Endurance___[Capacitance change] | Within ±30% of initial value |
| Endurance___[tanδchange] | 300% or less of the initial specified value |
| Shelf life___Test time | 500 hours at 135℃ ; Other items are same as the endurance. However, the performance shall be after voltage application treatment (JIS C5101-4). |
| Dimension φD | φ0.315 ±0.020 inch |
| Dimension L | 0.394 ±0.020 inch |
| Dimension A | 0.331 ±0.008 inch |
| Dimension B | 0.331 ±0.008 inch |
| Dimension (C) | 0.118 inch |
| Dimension (P) | 0.122 inch |
| Dimension W | 0.028 to 0.043 inch |
| Dimension M | 0.016±0.012 inch |
| RoHS Compliance (10 subst.) | Yes |
| REACH Compliance (251 subst.) | Yes |
| Soldering | Reflow |
| Standard Quantity | Embossed taping 500 pcs |