| Status |
Phaseout |
| Operating Temp. Range |
-55 to +105 ℃ |
| Rated Voltage |
50 V |
| Rated Capacitance |
33 uF |
| Tolerance at rated capacitance |
± 20 % |
| Leakage current (max) |
16 uA at 2 min |
| Tangent of loss angle (tanδ) (max) |
0.1 |
| ESR (max) |
0.63 Ω at 100kHz / 20 ℃ |
| Rated Ripple (max) |
200 mArms at 100kHz / 105 ℃ |
| Impedance ratio___[-25℃/+20℃] |
2 |
| Impedance ratio___[-40℃/+20℃] |
3 |
| Impedance ratio___[-55℃/+20℃] |
3 |
Endurance (Applied ripple current)
___[Test time] |
2000 hours at 105 ℃ |
| Endurance___[Leakage current] |
The initial specified value or less |
| Endurance___[Capacitance change] |
Within ±30% of initial value |
| Endurance___[tanδchange] |
200% or less of the initial specified value |
| Shelf life___Test time |
1000 hours at 105℃
; Other items are same as the endurance. However, the performance shall be after voltage application treatment (JIS C5101-4). |
| Dimension φD |
φ0.315 ±0.020 inch |
| Dimension L |
0.256 ±0.012 inch |
| Dimension A |
0.331 ±0.008 inch |
| Dimension B |
0.331 ±0.008 inch |
| Dimension (C) |
0.134 inch |
| Dimension (P) |
0.091 inch |
| Dimension W |
0.020 to 0.031 inch |
| Dimension M |
0.016±0.012 inch |
| RoHS Compliance (10 subst.) |
Yes |
| REACH Compliance (251 subst.) |
Yes |
| Soldering |
Reflow |
| Standard Quantity |
Embossed taping 1000 pcs |
