(Previous Part Number HV-10V331MG10-R2)
AL ELECTROLYTIC CAPACITORS
[Conductive Polymer Hybrid Aluminum Electrolytic Capacitors[HV1] for General Electronic Equipment]
| Status | Discontinued |
|---|---|
| Operating Temp. Range | -55 to +105 ℃ |
| Rated Voltage | 10 V |
| Rated Capacitance | 330 uF |
| Tolerance at rated capacitance | ± 20 % |
| Leakage current (max) | 33 uA at 2 min |
| Tangent of loss angle (tanδ) (max) | 0.18 |
| ESR (max) | 22 mΩ at 100kHz / 20 ℃ |
| Rated Ripple (max) | 2500 mArms at 100kHz / 105 ℃ |
| Impedance ratio___[-25℃/+20℃] | 1.5 |
| Impedance ratio___[-55℃/+20℃] | 2 |
| Endurance (Applied ripple current) ___[Test time] |
5000 hours at 105 ℃ |
| Endurance___[Leakage current] | The initial specified value or less |
| Endurance___[Capacitance change] | Within ±30% of initial value |
| Endurance___[tanδchange] | 200% or less of the initial specified value |
| Endurance___[ESR change] | 200% or less of the initial specified value |
| Shelf life___Test time | 1000 hours at 105℃ ; Other items are same as the endurance. However, the performance shall be after voltage application treatment (JIS C5101-4). |
| Dimension φD | φ8 ±0.5 mm |
| Dimension L | 10 ±0.5 mm |
| Dimension A | 8.4 ±0.2 mm |
| Dimension B | 8.4 ±0.2 mm |
| Dimension (C) | 3 mm |
| Dimension (P) | 3.1 mm |
| Dimension W | 0.7 to 1.1 mm |
| Dimension M | 0.4 ±0.3 mm |
| RoHS Compliance (10 subst.) | Yes |
| REACH Compliance (251 subst.) | Yes |
| Soldering | Reflow |
| Standard Quantity | Embossed taping 500 pcs |
