(旧品番 RV5-25V101MG68U-R2)
AL ELECTROLYTIC CAPACITORS
[Vertical Chip Type Aluminum Electrolytic Capacitors [VV5] for General Electronic Equipment]
| Status | Phaseout |
|---|---|
| Operating Temp. Range | -40 to +85 ℃ |
| Rated Voltage | 25 V |
| Rated Capacitance | 100 uF |
| Tolerance at rated capacitance | ± 20 % |
| Leakage current (max) | 25 uA at 2 min |
| Tangent of loss angle (tanδ) (max) | 0.18 |
| Rated Ripple (max) | 118 mArms at 120Hz / 85 ℃ |
| Impedance ratio___[-25℃/+20℃] | 2 |
| Impedance ratio___[-40℃/+20℃] | 4 |
| Endurance (Applied ripple current) ___[Test time] |
2000 hours at 85 ℃ |
| Endurance___[Leakage current] | The initial specified value or less |
| Endurance___[Capacitance change] | Within ±30% of initial value |
| Endurance___[tanδchange] | 200% or less of the initial specified value |
| Shelf life___Test time | 1000 hours at 85℃ ; Other items are same as the endurance. However, the performance shall be after voltage application treatment (JIS C5101-4). |
| Dimension φD | φ8 ±0.5 mm |
| Dimension L | 6.5 ±0.3 mm |
| Dimension A | 8.4 ±0.2 mm |
| Dimension B | 8.4 ±0.2 mm |
| Dimension (C) | 3.4 mm |
| Dimension (P) | 2.3 mm |
| Dimension W | 0.5 to 0.8 mm |
| Dimension M | 0.4 ±0.3 mm |
| RoHS Compliance (10 subst.) | Yes |
| REACH Compliance (251 subst.) | Yes |
| Soldering | Reflow |
| Standard Quantity | Embossed taping 500 pcs |