(Previous Part Number HTL-25V221MG10N-R2)
AL ELECTROLYTIC CAPACITORS
[Conductive Polymer Hybrid Aluminum Electrolytic Capacitors [HTL] for Automotive Body & Chassis and Infotainment]
| Status | Mass Production (Preferred) |
|---|---|
| Capacitance | 220 uF ± 20 % |
| Rated Voltage | 25 V |
| tanδ (max) | 0.14 |
| Operating Temp. Range | -55 to +125 ℃ |
| Leakage current (min) | 55 uA at 2 min |
| Rated Ripple (max) | 1600 mArms at 100k Hz / 125 ℃ |
| Impedance ratio ___[-25℃/+20℃] |
1.5 |
| Impedance ratio ___[-55℃/+20℃] |
2 |
| ESR (max) | 22 mΩ at 100k Hz / 20 ℃ |
| Endurance ___[Test time] |
8000 hr at 125 ℃ |
| Endurance ___[Capacitance change] |
Within ±30% of initial value |
| Endurance ___[tanδchange] |
200% or less of initial specified value |
| Dimension φD | φ8 ±0.5 mm |
| Dimension L | 10 ±0.5 mm |
| Dimension P (F) | Typ 3.1 mm |
| Dimension C (d) | Typ 3 mm |
| Shape | Vertical Chip for Vibration (SMD) |
| Type | Conductive Polymer Hybrid |
| RoHS Compliance (10 subst.) | Yes |
| REACH Compliance (240 subst.) | Yes |
| Soldering | Reflow |
| LeadForming/Taping | Taping Embossed |
| Standard Quantity | 500 |