(Previous Part Number RVD-25V470MF61U-R2)
AL ELECTROLYTIC CAPACITORS
[Vertical Chip Type Aluminum Electrolytic Capacitors[VVD] for General Electronic Equipment]
| Status | Non-preferred |
|---|---|
| Operating Temp. Range | -55 to +105 ℃ |
| Rated Voltage | 25 V |
| Rated Capacitance | 47 uF |
| Tolerance at rated capacitance | ± 20 % |
| Leakage current (max) | 11 uA at 2 min |
| Tangent of loss angle (tanδ) (max) | 0.14 |
| ESR (max) | 0.36 Ω at 100k Hz / 20 ℃ |
| Rated Ripple (max) | 250 mArms at 100k Hz / 105 ℃ |
| Impedance ratio___[-25℃/+20℃] | 2 |
| Impedance ratio___[-40℃/+20℃] | 3 |
| Impedance ratio___[-55℃/+20℃] | 3 |
| Endurance (Applied ripple current) ___[Test time] |
2000 hr at 105 ℃ |
| Endurance___[Leakage current] | The initial specified value or less |
| Endurance___[Capacitance change] | Within ±30% of initial value |
| Endurance___[tanδchange] | 200% or less of initial specified value |
| Shelf life___Test time | 1000 hours at 105℃ ; Other items are same as the endurance. However, the performance shall be after voltage application treatment (JIS C5101-4). |
| Dimension φD | φ0.248 ±0.020 inch |
| Dimension L | 0.228 ±0.012 inch |
| Dimension A | 0.260 ±0.008 inch |
| Dimension B | 0.260 ±0.008 inch |
| Dimension (C) | 0.106 inch |
| Dimension (P) | 0.079 inch |
| Dimension W | 0.020 to 0.031 inch |
| Dimension M | 0.016±0.012 inch |
| RoHS Compliance (10 subst.) | Yes |
| REACH Compliance (247 subst.) | Yes |
| Soldering | Reflow |
| Standard Quantity | Embossed taping 1000 pcs |
